- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenlCam Standard, and third-party software based on these protocol and standard.
MV-CA020-10GC
HIKROBOT Area Scan Camera CA Series
HIKROBOT Area Scan Camera CA Series
Covering 0.3-6M pixels, CA series equip GigE and USB3.0 interfaces, with a maximum frame rate of 814fps. Near-infrared enhanced camera model selectable, which can meet the visual application requirements of the near-infrared band (750-1100nm).
This series is mainly equipped with global shutter sensor, which can easily capture high-speed dynamic images and cover the needs in most applications; some models can support ultra-short exposures of 1μs, suitable for flying shooting and other Industries.
Product Downloads:
Model | Product Model | MV-CA020-10GC |
Type | 2MP Area Scan Camera, GigE,IMX430,Color | |
Performance | Sensor type | CMOS, global shutter |
Sensor model | IMX430 | |
Pixel size | 4.5 µm × 4.5 µm | |
Sensor size | 1/1.7″ | |
Resolution | 1624 × 1240 | |
Max. frame rate | 60 fps @1624 × 1240 | |
Dynamic range | 72.08 dB | |
SNR | 43.8 dB | |
Gain | 0 dB to 24 dB | |
Exposure time | 1 μs to 10 sec | |
Exposure mode | Off/Once/Continuous exposure mode | |
Mono/color | Color | |
Pixel format | Mono 8/10/12, RGB 8, BGR 8,Bayer GB 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed | |
Binning | Supports 1 × 1, 2 × 2 | |
Decimation | Supports 1 × 1, 2 × 2 | |
Reverse image | Supports horizontal and vertical reverse image output | |
Image buffer | 128 MB | |
Electrical feature | Data interface | GigE |
Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). | |
Power supply | 9 VDC to 24 VDC, supports PoE | |
Power consumption | Typ. 3.6 W@12 VDC | |
Mechanical | Lens mount | C-Mount |
Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) | |
Weight | Approx. 68 g (0.15 lb.) | |
Ingress protection | IP30 (under proper lens installation and wiring) | |
Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F); Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) | |
Humidity | 20% to 80% RH, non-condensing | |
General | Client software | MVS or third-party software meeting with GigE Vision Protocol |
Operating system | 32/64-bit Windows XP/7/10, 32/64-bit Linux and 64-bit MacOS | |
Compatibility | GigE Vision V2.0, GenlCam | |
Certification | CE, FCC, RoHS, KC |