8k Camera Link Line Scan Cameras，Mono
The CL series covers 2K-16K pixels and equipped with GigE/Camera Link/XoF interfaces, support a variety of ISP and algorithms that can fulfill various application needs of line scan cameras. The CL camera supports various ISP functions: Flat field correction, Gamma, LUT, white balance, CCM, SC, etc. to help users obtain higher quality image data; Despite timed exposure, a new acquisition method of trigger-width controlled exposure is added, and with external (soft/hard) trigger signals, it can flexibly adapt to external lighting conditions and exposure control needs. The High-Bandwidth Mode is equipped in the new GigE CL line scan camera. Breaking through the physical bandwidth of the gigabit network, the line frequency can been improved by 1.5-2 times, which provide users with a more cost-effective solution.
Model
- Product Model
- MV-CL081-41CM
- Type
- 8k Camera Link Line Scan Cameras，Mono
Performance
- Sensor type
- CMOS
- Pixel size
- 7 μm
- Sensor size (computed)from resolution × pixel pitch
- 57.34 × 0.01 mm
- Sensor diagonal
- 57.34 mm
- Resolution
- 8192 × 1
- Image mode
- 1-line
- Max. line rate
- 20 kHz (Base), 40 kHz (Medium), 80 kHz (Full)
- Configuration mode
- Base, Medium, Full
- Tap geometry
- 1 × 2, 1 × 4, 1 × 8
- Tap number
- 2 Taps, 4 Taps, 8 Taps
- Pixel clock
- 40 MHz, 66 MHz, 80 MHz, 85 MHz
- Dynamic range
- 64.7 dB
- SNR
- 44.3 dB
- Gain
- Supports 1 ×, 2 ×, 4 ×, 8 ×
- Exposure time
- 2 μs to 10 ms
- Exposure mode
- Off/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure
- Mono
- Mono
- Pixel format
- Mono 8/10/12
- Binning
- Supports 1 × 1, 2 × 2, 4 × 4
- Reverse image
- Supports horizontal reverse image output
- Trigger mode
- External trigger, internal trigger
- External trigger mode
- Line trigger, frame trigger, line + frame trigger
Electrical feature
- Data interface
- Camera Link (SDR connector); USB interface for updating firmware
- Digital I/O
- 12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
- Power supply
- 12 VDC to 24 VDC
- Power consumption
- Typ. 5.8 W @ 12 VDC
Mechanical
- Lens mount
- M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter
- Dimension
- 76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7")
- Weight
- Approx. 320 g (0.7 lb.)
- Ingress protection
- IP40 (under proper lens installation and wiring)
- Temperature
- Working temperature: 0 °C to 55 °C (32 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
- Humidity
- 5% RH to 90% RH (no condensation)
General
- Client software
- MVS and frame grabber software meeting with Camera Link Protocol
- Operating system
- 32/64-bit Windows 7/10,64-bit Windows 11
- Compatibility
- Camera Link V1.2, GenICam
- Certification
- CE, RoHS, KC
Firmware
Choosing a lens
Choosing a lens
The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.
Data cables the manufacturer lists
Frame grabbers
Lenses that fit this camera
Filtered by the M72-mount thread and by coverage — the image circle is at least 57.34 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm
30mm，F4.0，Image Size φ58mm，Recommended Magnification 0.031-0.145x，M72 Mount
40mm，F4.0，Image Size φ64mm，Recommended Magnification 0.05-0.21x，M72 Mount
Large Format Φ67mm 55mm Focal Length FA LENS
60mm，F4.0，Image Size φ58mm，Recommended Magnification 0.07-0.37x，M72 Mount
60mm，F4.0，Image Size φ64mm，Recommended Magnification 0.067~0.2X，M72 Mount
